View STA15K91P_1317722.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
STA15K7.5P thru STA15K100P
15,000 WATTS PEAK PULSE POWER 7.5 - 100 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR
Designer's Data Sheet
* * * * * * * * * FEATURES: 7.50-100 Volt Unidirectional Smaller than 704-15K35 and 704-15K36T types Hermetically Sealed Meets all environmental requirements of MIL-PRF-19500 Custom Configurations Available TX and TXV Screening Available APPLICATIONS: Protection of Voltage Sensitive Components Protection Against Power Interruption Lightning Protection
Maximum Ratings
Stand Off Voltage Steady State Power Dissipation Peak Pulse Power @ 1.0 msec Peak Pulse Power and Steady State Power Derating Peak Pulse Power and Pulse Width Operating and Storage Temperature VRWM PD PPP 5.6-75 100 15,000 Volts Watts Watts
SEE GRAPH
SEE GRAPH
-65C to +175C
Note: SSDI Transient Suppressors offer standard Breakdown Voltage Tolerances of + 10% (A) and + 5% (B). For other Voltage and Voltage Tolerances, contact SSDI's Marketing Department PEAK PULSE POWER VS. TEMPERATURE DERATING CURVE
PEAK PULSE POWER (% Rated 25C Power)
Package shown is standard configuration. SSDI can custom design your module with terminals that meet your unique design criteria. Additionally, SSDI can package these devices with an irregular footprint or offset mounting positions. This data sheet is meant to serve as an example of SSDI's Transient Protection Module Capabilities. For custom configurations, please contact SSDI's Marketing Department.
AMBIENT TEMPERATURE (C)
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: T00006C
DOC
Solid State Devices, Inc.
14701 Firestone Blvd, La Mirada, Ca 90638 Phone: (562) 404-4474 Fax: (562) 404-1773 ssdi@ssdi-power.com www.ssdi-power.com
STA15K7.5P thru STA15K100P
Peak Pulse Clamping
Voltage (Max) @ Current Tp=1ms (note 4) Maximum Continuous Current (note 4) Dynamic Impedance (note 2) ZBR @IBRT
Max Temperat ure
Coefficient
ELECTRICAL CHARACTERISTICS
Break Down (note 1) Part Number (note 5)
Nominal Voltage Test Current
Max Reverse Stand Off Voltage VRWM Volts
5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 Reverse Leakage Current
VBR Volts
STA15K7.5P STA15K8.2P STA15K9.1P STA15K10P STA15K11P STA15K12P STA15K13P STA15K15P STA15K16P STA15K18P STA15K20P STA15K22P STA15K24P STA15K27P STA15K30P STA15K33P STA15K36P STA15K39P STA15K43P STA15K47P STA15K51P STA15K56P STA15K62P STA15K68P STA15K75P STA15K82P STA15K91P STA15K100P 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100
@IBRT Amps
1.75 1.50 1.50 1.25 1.25 1.00 1.00 0.75 0.75 0.65 0.65 0.50 0.50 0.50 0.40 0.40 0.30 0.30 0.30 0.25 0.25 0.20 0.20 0.20 0.20 0.15 0.15 0.15
IR @VRWM mA
15.0 12.0 0.40 0.20 0.15 0.10 0.04 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02 0.02
VC Volts
11.7 12.5 13.8 15.0 16.2 17.3 19.0 22.0 23.5 26.5 29.0 31.9 34.7 38.5 42.9 46.9 50.0 55.6 60.0 65.2 71.4 78.9 88.2 93.7 107.1 115.4 125.0 136.4
IPP Amps
1280 1200 1090 1000 930 870 790 680 640 570 520 470 430 390 350 320 300 270 250 230 210 190 170 160 140 130 120 110
IRM Amps
12.5 11.5 10.2 9.5 8.6 7.7 7.0 6.0 5.5 5.0 4.4 3.9 3.6 3.1 2.8 2.6 2.4 2.1 1.8 1.75 1.7 1.6 1.5 1.3 1.2 1.1 1.0 .9
TC %/C
.03 .03 .03 .05 .05 .05 .05 .05 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .06 .07 .07 .07 .07 .08 .08 .08 .08 .09
Ohms
0.07 0.08 0.09 0.10 0.11 0.11 0.12 0.12 0.13 0.13 0.15 0.16 0.18 0.25 0.40 0.50 0.60 0.70 1.0 1.2 1.4 1.8 2.0 2.2 2.5 3.0 4.0 4.5
PEAK PULSE POWER VS. PULSE WIDTH
CURRENT PULSE WAVEFORM
STEADY STATE POWER DERATING (% of 25C Rated Power)
CASE TEMPERATURE (C)
% PEAK VALUE
PEAK PULSE POWER (kW)
PULSE WIDTH
For optional high reliability screening or higher zener voltages, consult SSDI MARKETING Department. Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to heating effects. 2. Dynamic impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC test current superimposed on the test current. 3. Ratings based on 25 C case temperature. 4. Pulse width (tp) is delined as the time from rated peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10ms X 1000ms waveform as defined by R.E.A.) 5. Part Number- For 5% Voltage Tolerance, sp ecify "B" in place of "A"
STEADY STATE POWER

▲Up To Search▲

Price & Availability of STA15K91P

	To Download STA15K91P Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .